AKUA Boat Fender Products

The Best Fender for Protecting your Boat

AKUA Boat Fenders has a series of boat fenders designed specifically for bass and fishing boats. Our fenders provide superior protection for your boat and do not require a rope or a cleat to fasten your fender. The advantages over competing products are numerous. Please read the information to the right to hear why choosing to use AKUA Boat fenders is the best choice to protect your investment.

AKUA Boat Fenders are NoRope/NoCleat which means:

The fenders do not hang from a rope. Therefore, they do not ride up or go sideways like conventional fenders.
The fenders do not need to tie to a cleat. (Cleats are never in the right position for a fender.) You can position the fender where needed.
The fenders are easy to put on and take off from both inside and/or outside the boat.

AKUA Bass Boat Fender

Shown on a Ranger boat

Designed to fit most bass boats. This fender has stood the "test of time;" it has been sold by Ranger for 24 years.

The 2 ½” suction cup requires a smooth surface on a gunwale that is at least 2 ½” wide. See Dan Rice’s video on media page.

Buy Now

Boat Fender Attachment Kit

Shown on a Ranger Reata boat

The Attachment Kit includes Taylor Made’s low freeboard fender and the Attachment.

The combination of fender and attachment is recommended for fiberglass boats with smooth gunwales i.e. Skeeter Deep V, Ranger Reatta, Triton Wall-eye, and Fish and Ski - See Dan Rice’s video on media page. (If you have an aluminum boat with smooth gunwales, check out the AKUA Aluminum Boat Fender and the Inflatable Aluminum Boat Fender Attachment Kit—See Jim LoDuca’s video on the media page.)

Buy Now

AKUA Bass Boat Fender Attachment

For boat owners who already have Taylor’s low freeboard fender. See Dan Rice’s video on media page.

Buy Now

AKUA Aluminum Boat Fender (Small)

Shown on a 175 Tracker boat

Designed to fit on smaller aluminum fishing boats with smooth gunwales (i.e. Lowe, Bass Tracker, Pro Crappie, Ranger, Triton, and G-3). The 2 ½” suction cup requires a smooth surface on a gunwale that is at least 2 ½” wide.

See Jim LoDuca’s video on media page.

Buy Now

AKUA Aluminum Boat Fender (Large)

Shown on a Tracker 175 Deep V

Designed to be used on larger Deep V aluminum fishing boats with smooth gunwales (i.e. wall-eye boats such as Lowe, Tracker). The 2 ½” suction cup requires a smooth surface on a gunwale that is at least 2 ½” wide.

Buy Now

Inflatable Aluminum Boat Fender Attachment Kit

Shown on a Tracker 175

This fender utilizes Taylor Made’s inflatable Hull Gard Fender (4 ½” x 16”) with attachment to fit on top of gunwale of small aluminum boats with smooth gunwales; i.e. Bass Tracker, Ranger, Triton, G-3, Crestliner Aluminum boats. Also has suction cup on bottom to keep fender close to hull.

See Jim LoDuca’s video on media page.

Buy Now

Hull Guard Fender - Small Size

Shown on a Lund boat

This fender fits under the rub rail and protects the hull with all NoRope/ NoCleat advantages. Used on boats that have carpeted, non-skid, grooved, or ribbed gunwales –where suction cups would not stick- i.e. Mako Bay Boats, Lund, Alumacraft, etc.

Buy Now

Hull Guard Fender - Large Size

Shown on a Targa Tracker Boat

This fender is the same as the aluminum boat hull fender but a larger size to fit larger aluminum boats that have grooved, non-skid, or rough gunwales i.e. Lund, Pro-V, Mako. Has same NoRope/NoCleat advantages

Buy Now

AKUA Pontoon Boat Fender

This fender was engineered to protect your pontoon boat, specifically the delicate corrugated fence. The fender attaches to the top rail and fastens down to the deck area. Pulled tight, the fender forms a "bridge" to protect your pontoon. This fender is especially effective when docking and rafting.

Buy Now

How Do Suction Cups Work?

The concept of how the suction cups work is simple. We use high density polyethylene (cutting board material) for the fender shell. Slots are cut into the top of the polyethylene where the suction cups fit. The slots allow the boat fender to slide upon impact eliminating stress to the suction cups. The sliding action allows the suction cups to hold, and they will not pop off. This feature was patented in 1996. To make the patented process work even better, closed cell foam is added to the back of the boat fender. The foam allows the bass boat fender to work like a mini shock absorber.

Why should you buy an AKUA Boat Fender?

AKUA Boat Fenders...

Help protect your boat from costly gel coat damage
Do not require a cleat or rope and they float
Stay where you place them; they will not ride up or go sideways like conventional fenders
Place and remove easily from inside or outside your bass boat
Stack and fit efficiently into your storage unit
Consist of high density polyethylene (cutting board material) and are built to last - limited lifetime warranty on material and workmanship
Utilize patented suciton cup attachment concept
And are Made in the USA by boaters and for boaters